IMPORTANT NOTICE
During the next period of time, the Thecus Wiki will migrate to a new site - the NAS Website. The migration is part of an improvement initiative, which includes giving the site a new look and making it more user friendly.
During the migration information may exist both at the old and new site, however slowly pages should start to be located mainly at the new site. Please see the NAS Website for details.
N5200 Module: SERGETTY
From Thecus Wiki
Page migrated to NASWebsite.com
Contents |
Facts
Name: SERGETTY (GETTY (login) on serial interface)
Maintainer(s): Andreas Vogel (omega)
Target: N5200
Latest version: 2.00.00
Depends on module(s): none
Description
General Overview and Installation
This module comes as a ZIP compressed file with the name N5200_<modname>_<version>.zip, where <modname> is the module name and <version> is the version number of the module. While unpacking the ZIP file, a new directory N5200_<modname>_<version> containing the module and its source code is created.
The module file is called <modname>.mod and the source code is located in the directory <modname>. The source code is included for interested people and is not needed for module installation. The file Makefile can be used to rebuild the module on Linux systems.
The module is installed using the "System"->"Module Mgmt" menu in the Thecus Web Server Administration. Specify the file <modname>.mod as the module file and press "Install".
The whole installation process is logged and sent as an E-Mail if you're configured in the E-Mail notification configuration. After successful installation enable the module in order to run the module.
After uninstallation of the module, a log of the uninstall process will be send to the user(s) configured in the E-mail notification configuration. Prior uninstallation of the module, the actual configuration data is backed up to the place "/data/raid/module/backup/<modname>". When the module is installed again, the module configuration is restored from that place if available.
Module version 2.00.00
This module enables the login on the serial interface (speed: 115200 bps, 8 bits, no parity, 1 stop bit). Just connect another computer to the serial interface and open the COM Port with some terminal program (e.g. HyperTerminal, ZOC, etc.).
On the module property page, you can do this:
- See a short module description.
News
- <2007-01-22>: First public release.
Versions
- Version 2.00.00
- Release date: 2007-01-22
- Works on firmware: 1.00.06.5
- Does not work on firmware: <= 1.00.05
- Download: N5200_SERGETTY_2.00.00.zip
- Major changes: First public release.